Forum Thermomix
Welcoming Center, Management and General Chat => Chit Chat => Topic started by: fundj&e on October 16, 2012, 01:22:11 am
-
i done step 11 now what, do i cook the cheese again in step 12 or take it out
Heat milk on temp 37 for 10 mins on speed 1
2.
Mix rennet with 1 tbspn water (filtered or unchlorinated better), and add to milk. Stir for 1 min on speed 1
3.
Pour milk into ThermoServer and let it sit for 1 hour.
4.
Cut the curds into 2 cm strips both ways and at a 45 degree angle
Let the curds sit for another 10 minutes
6.
At this point, we bring the curds back up to temperature and then drain them
7.
Transfer the curds & whey from the ThermoServer back into the TM bowl. Reheat on 37 for 30 mins on speed
8.
Line the rice basket with the cheesecloth. Pour the curds & whey into the rice basket over a ThermoServer. You will need to keep the whey for later
.
Cover the curds with cheesecloth and place a heavy weight on top. You will need to sit the rice basket somewhere the why being pressed out can drain away. Leave for 30 minutes, then turn out of the rice basket
10.
Cut the curds into pieces. Pour the whey back into the TM and heat for 5 mins, 90 degrees, speed 1.
11.
Put the rice basket in the TM bowl and put the pieces of halloumi back into the rice basket. Cook for 30mins, speed , on 90. The halloumi will rise to the top when it is done
12.
Pour off all but 250g of the whey. Add 250g of boiling water and 50g salt and cook for 100, speed 1, for 5 minutes. Let it cool, then put cooked halloumi into a container and cover with brine.
-
Uni, have never made it but from reading the recipe you have on your post. At step 11 the whey is already heated in the TM bowl and the cheese is in the basket. Cook for 30 mins etc. That is what I would do from that recipel Sorry can't help further.
Marie
-
No idea
-
no idea either.
-
thanks ladies i am looking at other recipes on the net by the sounds of it further cooking needed, i hope :-))
-
Nope, step 12 is just making the brine, not cooking the halloumi more. Leave that aside.
HTH :)
-
thanks Zada that what i did but was not sure, i fried a tiny bit of it just to taste it, its very nice , let see what my DDs think of it 2nite
-
Yes Zada is right. The homemade haloumi is lovely. I think the second time I made it I made it slightly less salty brine.
-
This is deffinately on my things to make list. My family LOVE Halloumi. Will be interested to hear how it turns out Fundj&e
-
it was great Shazzy, will make more at the end of the week
-
i kept the MC in whlie heating the milk and the lid off whlie resting for 1 hour if i dont write it on here now i will forget what i did. the recipe on the other forum doesnt say anything about MC or the lid
-
Yes Zada is right. The homemade haloumi is lovely. I think the second time I made it I made it slightly less salty brine.
i kept the salt at 50g and the 4 greek ppl :-)) who ate it only 1 said it was a bit salty, it was fine for me
-
Good to hear. Will have to give it a go soon.
-
If anyone has questions about the Halloumi recipe, I recommend you ask them here, where the Thermomix enthusiast who developed the recipe is answering them:
http://www.recipecommunity.com.au/recipes/halloumi/33784
She also has the photos alongside of the steps of the recipe, the heading set out and lots of comments from others who have tried the recipe.
-
Hi, I'm the author of the recipe, someone sent me a link to this to come answer any questions you may have :)
With heating the milk, as you have already figured out, the MC should be on. The 37 degrees does have a little latitude in the temp as it is about 1 degree hotter than the milk needs to be. After you transfer the milk to the ThermoServer to rest for the 60 minutes, you should put the lid on the ThermoServer. As curds are forming in cheese, we need to keep the temperature as stable and close to the 37degrees as possible so that the enzymes in the rennet can work.
In step 11, after the halloumi rises to the surface, you remove it from the TM. Step 12 is just making some of the whey into a brine to cover your newly made halloumi to make it a little salty and help it last for a week or so. If you intend to eat the whole lot straight away (which, I have to admit, has happened to me ;D)., then you can skip making the brine completely. If you use it without the brine, you may find you need to add a little salt
Happy cheesemaking ;D
-
thanks for clearing that up for me Daleerin and can i say my DD said it is better than the bought one, making more today just for her and she said she is not sharing :-))
-
Hi all! I hope it's ok to revive old threads here (if not do let me know)....
I'm wondering where to buy Rennet.... I'm in WA, Perth (more specifically around Fremantle)...
I found http://cheeselinks.com.au/
but I was hoping it was something that was easier to find than mail order...
also cheeselinks seems to only sell kits.
can anyone shed some light on this for me? Thanks :)
-
I bought some junket tablets. From memory I used 4 tablets crushed up and mixed with a tiny bit of water.
-
ah! Thanks cookie. I had really bad luck with junket before :D and I did read somewhere it wasn't quite the same thing but if it worked for you I'd be willing to give it a go.... might be easier to find. (anyone else with comments about rennet? :) )
-
i have made halloumi about 6 time now and only used 2 tablets but last week i did try 3 , no difference.
-
i have made halloumi about 6 time now and only used 2 tablets but last week i did try 3 , no difference.
With junket?
Great photo. I can't wait to try!
-
yes with 2 junket tablets
-
I will use 2 this time then, thanks Uni. I think you did mention it before. Even my DH likes home made Haloumi.
-
I've never made haloumi before but you've inspired me to give it a go.
-
There is this link (http://www.forumthermomix.com/index.php?topic=9224.0) that is worth reading too.
-
Thanks for the link cookie and for the reply fundj&e! I bought some junket and extra milk :)
and they had a sale on Quark so I got some to make more cream cheese!