Forum Thermomix
Questions Doubts and Requests => Tips and Tricks => Topic started by: UnConundrum on February 02, 2009, 02:22:36 am
-
Is there some trick to clearing the time other than holding in the - sign until the time is gone? Seems to be a real PIA to just hold that button in. Should be some kind of reset or clear button....
-
Press the - and + signs at the same time.
-
From p29 of the Manual (http://www.vorwerk.com/thermomix/pdf/instructionmanual_tm31_web.pdf)
There is a link in the Questions section of the Forum
"Timer buttons and timer display
Observe the following sequence of steps if you wish to prepare or heat food in your Thermomix TM 31:
Step 1: Select a time
Therefore use the timer buttons to preset an operating time of up to 60 minutes .
Press the + to increase time and the – button to reduce it.
To change time gradually, press the button briefly.
Press and hold the + button to increment the timer display rapidly, e.g. .
Time selection:
0– 1 minute in increments of 1 second
1–10 minutes in increments of 30 seconds
10–60 minutes in increments of 1 minute
When the display is in the zero setting you can preset the time directly to 1 minute by briefly
actuating the – button; therefore you do not have to count up in increments of 1 second.
Then proceed as indicated above.
Press both buttons simultaneously to set the displayed time to 00:00 . "
-
Ugh. Missed that totally, and I looked several times. I guess there's a reason they tell me I'm dyslexic :(
Thanks :)
-
i didn't know that either, i've always used the - button :P
-
That's the great thing about our forum - the little things that we find out from our friends.
I have learned so much from others.